Several installation methods for integrated domestic sewage treatment equipment

2025-12-04 09:36:09

Under normal circumstances, integrated sewage treatment equipment can be divided into three installation modes The first one is installed above the ground level, the second one is installed below the floor line, and the third one is installed below the ground level If the equipment is to be installed under the floor, the relative height of the base plate should be based on the dimensions on the drawing, the width should be excavated in all directions, and the distance from the baseline length must exceed 500 millimeters to facilitate the installation of the equipment

When connecting pipelines, it is necessary to consider the location of the equipment The equipment must match the weight of the crane to match its tonnage During the installation process, it is necessary to fully understand the site location, pipeline connections, etc., and have appropriate installation drawings and equipment Afterwards, the pipeline must be connected and fixed with rubber pads and screws to ensure no leakage at the joint

2. During installation, it is necessary to place the equipment according to the design drawings, remember that the direction must be accurate, not placed in the wrong place, and the spacing must be accurate After installing the equipment, it is necessary to fix the equipment and the foundation floor, and ensure that the equipment does not float Then we must fill the equipment with water and implement each pipeline to check for any leaks

With the continuous requirements of environmental regulation and market upgrading, the sewage treatment industry is also about to enter the era of large-scale construction and operation Then the integrated domestic sewage treatment equipment system can meet the sewage treatment needs of special industries such as domestic sewage, organic industrial sewage, animal husbandry wastewater, and other hospitals It has no special requirements for terrain, space, climate, water quality, etc., and its land area can also be determined according to the specific situation and needs of users As his system is designed based on modules, it can be built centrally or sporadically for decentralized construction and meet the overall processing requirements of users.